The Effect of Sloping the Grinder Body of the Meat-Mincer Machines on the Reduction of Microorganism and Chemical Residuals after Cleaning-A Newly Design

M. Tahir Altınbalık & Ömer Faruk Akbulut

doi:https://doi.org/10.29329/ijiaar.2022.434.2

Original article | Open Access
International Journal of Innovative Approaches in Agricultural Research 2022, Vol. 6(1) 12-26

The Effect of Sloping the Grinder Body of the Meat-Mincer Machines on the Reduction of Microorganism and Chemical Residuals after Cleaning-A Newly Design

M. Tahir Altınbalık & Ömer Faruk Akbulut

pp. 12 - 26 | DOI: https://doi.org/10.29329/ijiaar.2022.434.2

Published online: March 31, 2022 | Number of Views: 84 | Number of Download: 302

Download PDF

Abstract

Hygiene is critical for human health, particularly in locations where industrial meat products are produced. One of the most common causes of contamination in the meat sector is meat grinders, which are notoriously difficult to clean. As a result, eliminating the water that has accumulated in the body is critical for the meat grinders' hygiene. In the presented study the effect of tilting the neck region after grinder body washing on total bacterial growth, pH, and pathogens in a meat grinder functioning regularly in a workplace was investigated. The machine was cleaned, then set to the predetermined angle value and the sample was taken 5 minutes later. The machine was maintained at this angle value for 15 hours, then swab was taken before the morning began. swab samples were taken after cleaning and pre-production at 0, 10, 20, 30, and 40 degrees slopes. When the results were combined, it was discovered that about 30% decrease in the overall number of bacteria was observed with a 30-degree tilt. Since there is no antigen in the neck region after the cleaning, there is no salmonella and Listeria monocytogenes. The pH level approached that of the cleaning water, eliminating the cleaning chemicals' impact.

Keywords: Meat Hygiene, Meat Grinder, Cross-Contamination, Design, Bacteria, Pathogen

How to Cite this Article

APA 6th edition
Altinbalik, M.T. & Akbulut, O.F. (2022). The Effect of Sloping the Grinder Body of the Meat-Mincer Machines on the Reduction of Microorganism and Chemical Residuals after Cleaning-A Newly Design . International Journal of Innovative Approaches in Agricultural Research, 6(1), 12-26. doi: 10.29329/ijiaar.2022.434.2

Harvard
Altinbalik, M. and Akbulut, O. (2022). The Effect of Sloping the Grinder Body of the Meat-Mincer Machines on the Reduction of Microorganism and Chemical Residuals after Cleaning-A Newly Design . International Journal of Innovative Approaches in Agricultural Research, 6(1), pp. 12-26.

Chicago 16th edition
Altinbalik, M. Tahir and Omer Faruk Akbulut (2022). "The Effect of Sloping the Grinder Body of the Meat-Mincer Machines on the Reduction of Microorganism and Chemical Residuals after Cleaning-A Newly Design ". International Journal of Innovative Approaches in Agricultural Research 6 (1):12-26. doi:10.29329/ijiaar.2022.434.2.

References

Alvseike, O., Prieto, M., Torkveen, K., Ruud, C. & Nesbakken, T. (2018). Meat inspection and hygiene in a meat factory cell-An alternative concept. Food Control, 90, 32-39. [Google Scholar]
Chung, S. & Hellberg, R. (2020). Effects of poor sanitation procedures on cross-contamination of animal species in ground meat products. Food Control, 109, 1-6. [Google Scholar]
Gokulakrishnan, P. & Bandyopadhyay, S. (1995). Formulation and characterization of some pelleted feeds for Penaeus monodon. Fish. Technol., 32(1), 19-24. [Google Scholar]
Gu, G., Ottesen, A., Bolten, S., Wang, L., Luo, Y., rideout, S., Lyu, S. & Nou, X. (2019). Impact of routine sanitation on the microbiomes in a fresh procedure processing facility. International Journal of Food Microbiology, 294, 31-41. [Google Scholar]
Henriques, A.R., Gama, L.T. & Fraqueza, M.J. (2017). Tracking Listeria monocytogenes contamination and virulence-associated characteristics in the ready-to-eat meat-based food products industry according to the hygiene level. International Journal of Food Microbiology, 242, 101-106. [Google Scholar]
Irmscher, S. B., Gibis, M., Herrmann, K., Kohlus, R., & Weiss, J. (2016). Development of a novel homogenizer using the vane pump-grinder technology for the production of meat batter. Journal of Food Engineering, 169, 10-17. [Google Scholar]
Isaksson, T., Nilsen, B.N., Togersen, G., Hammond, R.P. & Hildrum, K.I. (1996). On-line, proximate analysis of ground beef directly at a meat grinder outlet. Meat Science, 43(3-4), 245-253. [Google Scholar]
Lee, E.J., Kim, Y.H., Lee, C.H., Kim, H.S. & Kim, H.S. (2016). Effect of different physical conditions on fouling control in in-situ chemical cleaning in place (CIP) for flat sheet membranes fouled by secondary effluents. Chemical Engineering Journal, 302, 128–136. [Google Scholar]
Michael, I., Michael, C., Duan, X., He, X., Dionysiou, D.D., Mills, M.A. & Fatta-Kassinos, D. (2015). Dissolved effluent organic matter: characteristics and potential implications in wastewater treatment and reuse applications. Water Res., 77, 213-248. [Google Scholar]
Milios, K.T., Drosinos, E.H. & Zoiopoulos, P.E. (2014). Food safety management system validation and verification in meat industry: carcass sampling methods for microbiological hygiene criteria-A review. Food Control, 43, 74-81. [Google Scholar]
Moller, C.O., San’ana A.S., Hansen, S:K.H., Nauta, M.J., Silva, L.P., Alvarenga, V.O., Maffei, D., Pacheco, F., Lopes, J., Franco, B.D.G.M., Aabo, S. & Hansen, T.B. (2016). Robustness of of a cross contamination model describing transfer of pathogens during grinding of meat. Procedia Food Science, 7, 97-100. [Google Scholar]
Rodriguez-Narvaez, O.M., Peralta-Hernandez, J.M., Goonetilleke, A. & Bandala, E.R. (2017). Treatment technologies for emerging contaminants in water: a review. Chemical Engineering Journal, 323, 361–380. [Google Scholar]
Rout, R.K. & Bandyopadhyay, S. (1999). A comparative study of shrimp feed pellets processed through cooking extruder and meat mincer. Aquacultural Engineering, 19, 71-79. [Google Scholar]
Zhao, Y. & Sebranek, J.G. (1997). Technology for meat-grinding systems to improve removal of hard particles from ground meat. Meat Science, 45(3), 389-403. [Google Scholar]

Volume 6 Issue 1

March 2022

All Articles